MG Steerable Wheel
MG/MGE02
- Easy installation
- Weight and space savings
- Torque: 273 Nm to 633 Nm
- Displacement: 172 cm3/U up to 398 cm3/U
- with or without static holding brake
- Integrated stops Steering angle limitation
- Integrated mounting of steering cylinders
- Grease nipple on steering column
MG/MGE11
- Steering angle of 90
- up to 450 bar[6 530 PSI]
- from 830 to 2 800 cm³/rev[51 to 154 cu. in/rev]
- Two-speed configuration allows the operator to adjust torque to suit ground conditions
- Integrated electro-hydraulic displacement changeover: no hydraulic control line required
- The hose has a longer service life. The hose connections remain firm, because of the high pressure in the hose.
- Motor integrated hydraulic swivel joints no bending stress occurs
- User-friendly "plug and drive"concept of the entire steering unit by simply screwing it together (Bolt on system)
- Joint holder (optional)
MG21
- Steering angle of 90
- up to 450 bar[6 530 PSI]
- from 830 to 2 800 cm³/rev[51 to 154 cu. in/rev]
- Two-speed configuration allows the operator to adjust torque to suit ground conditions
- Integrated electro-hydraulic displacement changeover: no hydraulic control line required
- The hose has a longer service life. The hose connections remain tight, as the hydraulic swivel joint integrated in the motor eliminates bending stress.
- User-friendly "plug and drive"concept of the entire steering unit by simply screwing it together (Bolt on system)
- Joint holder (optional)
Downloads
